Control

Power Factor

V

Thread Starter

VINO RAJU

we have a power plant with 7.5Mw. one of our generator recently failed due to reverse power. due to that rotating diode set burned out and replaced with new. after troubleshooting we were put on line, but starts hunting KA and pf, on load and no load were V and HZ constant. for fixing this problem i were replaced AVR and EFC. could any one can help me to overcome this problem?
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
J Power factor correction Electrical Engineering 14
Ghaith123 Steam tripping after one minute of the GCB closed and the first alarm is STG power factor Power Generation 12
A Excitation System: VAR vs Power Factor Control Modes Power Generation 3
A What is Power Factor Correction? Power Generation 3
Zeshan2050 Generator Power Factor drops to 0.3 On Inductive Load. Power Generation 2
Similar threads
Power factor correction
Steam tripping after one minute of the GCB closed and the first alarm is STG power factor
Excitation System: VAR vs Power Factor Control Modes
What is Power Factor Correction?
Generator Power Factor drops to 0.3 On Inductive Load.

You May Also Like

Top